2 inch Pinch Rollers   >>> NEW - New stock - polyurethane (the best!)   $ 200.00        comes with bearings.         Precision Mastering-Grade units     Custom Manufactured for us

  2 inch MM 1100 Tape Lifter Sleeve   >>> NEW - new stock !!! $ 125.00 each
Precision Mastering-Grade units Custom Manufactured for us

Tension Bar   >>> NEW - new stock !!! for and MM 1100 $ 100.00
Precision Mastering-Grade units Custom Manufactured for us

2 inch Tape Roller Guides  >>>NEW - new stock !!!  on SALE !! was $  450.00 each     now 175.00 each !!!
Precision Mastering-Grade units Custom Manufactured for us
You MUST replace the stationary Post Guides if you have an early version MM 1100
this will reduce the Wow and Flutter and insure proper tape speed - a MUST HAVE

Note these roller guides do NOT come with the bottom holder - they were designed
to be replacements for the MM 1200 rollers if someone damaged theirs.... thus the bottom piece was
never made.     You can easily build up your own 'bottom' by using standard washers
available just about everywhere... a bunch of folks have done this to their machines and it's easy.

  All the Ampex - New - Old Stock Cards have been SOLD !!

AMPEX   used - great condition - 2 Inch Tape Recorder Parts

Ampex MM 1100 parts:
 
  2 inch Ampex MM1200 Capstan Motor     Worked great when pulled from service.
  A steal at 475 bucks! !
 
 
AMPEX Remote Cable - very rare - fully tested in good condition (about 15 feet in length)     $ 400.00
 
 
AMPEX Remote Counter unit for MM1100 and MM1200 tape decks
      cable about 15 feet in length -   has Cue and Search buttons and tape timer display       $ 225.00
 

AMPEX MM1100 Transport Cards (used)

Capstan Servo Card

Capstan Servo Card (without crystal)

Transport Control Card (MM 1100) no take-up boost  

Transport Control Card with take-up Boost ()

Counter / Search-To-Cue Card

AC Stabilzer Card for MM1100   $50  

Stationary 2 inch tape guides  $50  

2 inch Roller guides (used)  all sold ! 

2 inch Tape Roller Guides NEW - new stock !!!   $450.00     SALE!   $ 175.00  

2 inch Pinch Rollers  NEW - New stock - polyurethane (the best!)   200.00

2 inch Pinch Rollers - used but still OK - all sold

2 inch  or MM 1100 Tape Lifter Sleeve NEW - new stock !!! 125.00 each

Tension Bar NEW - new stock !!!  for MM1100   $100  

Transport Switches  (new) for MM1200 and MM1100  none left for sale - sorry !! 
   I called the manufacturer of the original Ampex transport Switches
   and they'll make more new switches at a cost of $ 225.00 PER SWITCH!
   When my stock is gone that's it... you'll have to mod your machines to 
   take other kinds of switches.... and it ain't gonna be easy!		

Ready/Safe Switches (new !!!) for MM1100  very hard to find  All Sold ! 

Ready/Safe switch Caps (new)  - Blank -  MM 1100  very few left !!! 15.00

Ready/Safe Switch Caps (new) -with numbers !!! only a few left  MM 1100  22.00

Ready/Safe Switch Caps (used) -with numbers  MM 1100   very few left!! 15.00

Audio relays: You must use a special relay for the Sync/Repro relay 
                           for all  and MM 1100 recorders...  $ xx.00 each 
                     oops, now we're out of them again!

Ampex PURC Bias cards  - for gapless punch-ins!  4 left  !!   $100.00  

You have to mod your switcher card to use PURC bias cards

in a MM 1100 machine !!! 

  

 
MM 1100 Audio Switcher (mother board) Card  (no relays included)   $75  

Record Card    no EQ insert  

Repro Card     no EQ insert  has 199 xmfr (15 / 7.5 ips)  

Repro Card     no EQ insert  has 044 xmfr (30 / 15 ips)   

PURC Bias cards  - for gapless punch-ins!  8 left  !!   $100  

Record Card EQ insert (15 / 7.5 ips)

Repro Card EQ insert    very few left

Repro Card head transformers (044) for 7.5/15ips conversions to 30/15 ips   $25  

 MM 1100 VU meters   $75   

COMPLETE AMPEX MM1100 or MM1200 24 track headstack !!!!
10 - 15% life left on the heads, good condition
              $ 750.00   (sold As-Is)

   These were parts that  unqualified people worked on - people 
traded these in when they ordered good working cards.  The 
quality of their workmanship is poor... and I have NOT fixed these
cards.  These cards are great for parts, or fixing yourself.....
They are all sold "AS-IS" without warantee or guarantees of any kind!!!


Repro Card:  Poor quality repairs. ALL components have been
	 resoldered.  Card Tested Ok!  Has blank 
	 aluminum pull plate.  Has 199 transformer   $10  

Repro Card.  Not Ampex, but a copy.  Poor condition, NOT TESTED.
	 has 199 xmfr and blank aluminum pull plate.   $10  

MM 1100 Counter / Search-To-Cue card:  Lots of sockets,
	 not all ICs on board. NOT TESTED.  Looks Ok though....  $65  

MM 1100 Transport Control Card.  Poor quality repairs made by someone...  
	3 wire-wrapped sockets installed, modified for 8 pin 741 IC.
	  Card works Ok !!!   Can mod for MM1200 use! $75  

MM 1100 Transport Control Card.  Poor quality repairs by someone.  
	Has some sockets, missing a few parts.  Looks fully repairable.
	  NOT TESTED   $50   

 Getting impossible to find anywhere....  

    Since IC's are easily damaged these ICs are NOT returnable.   
      We are ONLY selling these in an AS-NEEDED basis for you own repairs...

     NOTE THAT THESE ICs ARE EXPENSIVE - they're OBSOLETE!!
They haven't been made for years and years... and are extreemly hard to find.  
  
MC 846		MC 668		MC 665		MC 680		MC 661

     U6A9950 (cap servo)		MC 853 (cap servo)